During a standard professional DISH Network® or DIRECTV® satellite dish installation, 2questions will give you some insight into how signals are established and how the equipment can be adjusted for better reception.
How do you prepare for a DISH Network or DIRECTV satellite dish installation?
Standard professional installation of a parabolic satellite dish and the receiver of your choice can take more than 2-4 hours depending on the amount of TV’s you have. TV-Providers.com assists you in preparing for DISH Network technicians to arrive.
The most important of these preparations includes scouting out a viable location for your new DISH Network satellite antenna. To get a good DISH Network satellite signal, the area should be free of obstructions. Make sure it’s accessible so you can make adjustments as necessary.
How does a parabolic satellite dish work?
When you compare cable vs satellite service, you’ll recognize that the big difference is the equipment used to deliver the cable signal or DISH Network satellite signal to your household. A DISH Network or DIRECTV satellite dish installation includes the use of parabolic satellite dish.
A parabolic satellite dish is made up of two main parts, the dish and the feed horn. There is a satellite in orbit, which beams a signal down to the DISH Network or DIRECTV satellite setup on your property. The dish signal strength is affected by how well your antenna is capturing the signal and collecting it in the feed horn to be focused.
During a DISH Network or DIRECTV satellite setup, what is peaking?
A DISH Network and DIRECTV satellite dish installation includes a service called peaking. Even if you don’t know much about satellite dish technology, it’s easy to grasp. Once a DISH Network TV or DIRECTV satellite setup is completed, the technician makes a series of minor adjustments to the equipment. These little swings of the DISH Network satellite antenna left and right and re-angling by degrees up and down are all part of an attempt to best capture the DISH Network satellite signal.
How do you ensure the stability of a DISH Network satellite antenna?
The parabolic satellite dish must be stable and fixed using bolts. It is important that you use a level when setting the dish up. The critical thing to remember is that the mast for the dish antenna must be truly perpendicular. Additionally, don’t tighten all the bolts until you’ve determined on your own or with a DISH Network signal strength meter or DISH Network satellite finder that the signal is peaked.
How does a DISH Network satellite finder work?
The DISH Network satellite finder is a more expensive piece of equipment. They can cost hundreds of dollars as they are more precise. Rather than simply telling you that you have a signal and indicating its strength, when you do your DISH Network or DIRECTV satellite setup with a finder, you can actually determine which of the satellites in orbit you have found.
What recurring problems arise after a DISH Network or DIRECTV satellite setup is over?
After a professional DISH Network or DIRECTV satellite dish installation, be mindful of debris getting blown over to your dish antenna. Watch for any growth of trees that might block the signal. After particularly inclement weather, check the signal. If you’re not happy with it, make some adjustments and re-fasten the bolts so they’re nice and tight.